The absence of ventilating openings means that all heat dissipates through the enclosure through conduction. Most TENV motors are fractional horsepower in size. TENV motors can be used indoors and outdoors.
What type of motor enclosure is totally enclosed and non ventilated?
TENV (Totally Enclosed Non Ventilated) Similar to TEFC but the motor is designed with a low enough temperature rise so that an external fan is not required for cooling, or duty is limited so the motor does not overheat.
What is a totally enclosed air over motor?
Totally Enclosed Air Over/Airtight (TEAO)
This motor has a dust-tight frame or enclosure. It is typically installed in the airstream, and the air movement generated by the fan passes over the motor to provide cooling. TEAO motors would be used in areas with direct drive where the motor is in the airstream.
Which type of motor enclosure is best?
When considering which motor enclosure is best, look at the type of cooling the motor requires and most importantly the environment that the motor will be operating in. Open Drip Proof – ODP motors are almost always the least expensive of all motors which often times makes them the preference of equipment OEM’s.
What is DP enclosure?
Drip-Proof/Open Drip-Proof (DP/ODP)—Designed for use on horizontal motors, such as fire pump motors, these prevent drops of liquid or solid particles from entering ventilating openings in the enclosure at any angle from 0 to 15 degrees downward from the vertical.
What is a drip proof motor?
TEFC (Totally Enclosed Fan Cooled) describes a totally enclosed motor housing, that has an external fan located at the back of the motor and during operation it directs air forward across the motor housing. The motor housing will have a ribbed structure that are a type of heat sink to help dissipate the heat.
What is enclosure of motor?
An enclosure protects a motor from contaminants in the environment in which it is operating. In addition, the type of enclosure affects the cooling of the motor. Enclosures are categorized as either open or totally enclosed, and there are different types of enclosures within each category.
What is a DP motor?
DP – Drip-Proof
An open motor in which the ventilating openings are so constructed that drops of liquid or solid particles falling on it, at any angle not greater than 15 degrees from the vertical, cannot enter either directly or by striking and running along a horizontal or inwardly inclined surface.
How do I know if my motor is explosion proof?
Motors that satisfy UL explosion proof certification are clearly identifiable by a UL listing identification plate, affixed to the motor enclosure. The plate defines the class, division and group compliance of the motor.
Is a Class 1 Div 2 motor explosion proof?
While Division 1 motors in Class I locations must be explosion-proof, Class II, Division 1 motors must be dust- ignition-proof. … Nameplate require- ments for Class I and Class II locations are essentially the same — the class, group, and T-code of the motor must be clearly displayed.
What class is explosion proof?
There are three classes of explosion proof lights known as Class I, Class II, and Class III. These are the broadest sense in which explosion proof lights are distinguished from each other. The classes are each broken down further into two separate divisions.