What Is REM in car stereo?

It stands for Remote, AMPs are kind of like TV sets, you can plug it in but unless you click the power button nothing will happen. So, rem, is the power button. You need to either go to you Head Unit (deck) and splice the wire into the remote trigger or go to your fuse box and use the IGN or ACC fuse.

What is an REM terminal in amplifier?

The REM terminal is the remote wire. It is used to turn on the amp when the radio gets power. If you look at the back of HU, you should see a blue wire. This wire gets connected to the remote terminal on the amp. Without this feature, the amp would stay on all the time, even with the engine off.

What does REM out mean?

Filters. (programming) To temporarily disable a section of source code by converting it into a comment.

Can I run my remote wire to my battery?

No, run the remote wire to the remote out on the back of the headunit. You can then install a switch on the remote wire to turn it on or off, but if you run it directly to the battery you will have problems because the amps will always be on, and you will kill your battery.

THIS IS IMPORTANT:  Should you rev your engine in park or neutral?

What is the orange and white wire in a car stereo?

The normal use of orange and orange/white wires is orange is for variable voltage to control display illumination dimming (i.e. the head unit display dims along with the other dash lights) while orange/white is a simple on/off signal of whether the dash lights are on (the head unit has only bright and dim display …

What color is the remote wire?

Wiring Harness Color Standards

Wire Color Wire Function
Red Switch / Accessory
Black Ground
Blue Antenna Remote
Blue with White Stripe Amplifier Remote Turn-on

What color wires go together in a car stereo?

The right-front speaker wires are gray, left-front speakers are white, right-rear speakers are purple, and left-rear speakers are green. Ground wires are black, antenna wires are blue, and amplifier wires are blue with a white stripe.

Do you need a remote wire for amp?

Your amp will be on when your car is on and off when you car is off. If you don’t want the amplifier to always be on when the car is on you could wire a simple switch inline with this new remote wire. Normally you would leave it on so that it turns on when the head unit is on.

What does GND mean on an amp?

What is amplifier ground and where should we ground an amp? Amplifier ground refers to the ground wire that safely provides the least amount of electrical resistance to earth ground or chassis ground to minimize the chance of electrocution.