Press and hold the odometer/trip display button while turning the ignition switch to ON, or pressing the push start button once. Remember: never use the brakes or fully turn the car on! Keep holding the button down until the maintenance required light turns off.
How do you reset the maintenance required light on a Toyota?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
How do I reset my oil maintenance light?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Press the the gas pedal slowly to the floor three successive times within 10 seconds. Turning the ignition off. If the light is still on the next time you start the truck, repeat the process.
Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
How do I turn off the dashboard warning lights?
How to Reset the Warning Lights on the Dash
- Open the hood of your vehicle. …
- Loosen the nut that holds the negative terminal to the battery with the pliers. …
- Completely remove the cable from the negative battery terminal. …
- Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.
How long can I drive with the maintenance required light on?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do you turn off the maintenance required light on a Toyota push start?
Continue to hold the “Trip” or “Disp” button while turning the ignition of the vehicle on. On push button models, press the Engine Start button two times. Do not start the engine. When the odometer displays all zeros, it will confirm the maintenance light has been reset.
Why won’t my change oil light go off?
To reset the oil change reminder light on your vehicle: Turn the ignition key to the run position, do not start the vehicle. Press the gas pedal fully 3 times within 10 seconds. Turn the ignition to the off position. Wait 10 seconds and start the vehicle.