Where is the transmission shift cable?

A transmission shift cable (also called a shifter cable or any of the names listed above and even others that we may not have yet heard), is the link between the shifter handle and the transmission in a vehicle.

Where is the shift cable located?

The shift selector cable connects the gear shifter, located on the steering column or on a floor mounted console, to the automatic transmission. The cable is typically steel and is protected from the elements by a plastic outer sheath.

How do I know if my shifter cable is bad?

Symptoms of a Bad or Failing Shift Selector Cable

  1. Indicator doesn’t match the gear. If the shift selector cable is going bad, the indicator light or cable will not match the gear you are in. …
  2. Vehicle will not turn off. …
  3. Vehicle starts in another gear. …
  4. Vehicle will not go into gear.

How do you remove a shift cable from a transmission?

Use a 9/16-inch wrench to loosen the nut on the shifter cable under the vehicle, turning the nut counter clock wise. Slide the cable out and off the shift lever on the side of the transmission.

THIS IS IMPORTANT:  Your question: How do you know if a used engine is good?

Can you drive a car with a broken shifter cable?

A mechanic needs to diagnose this problem to differentiate between parts that have similar symptoms. Only when the parts are replaced can your vehicle properly function. Yes, a car will run with a broken shifter cable, but that doesn’t mean you should drive it.

How much does it cost to fix a shift cable?

The cost for replacing shift cables in a manual transmission are not all that different from the automatic transmission. You could expect to pay somewhere between about $200 and $450 to get the shift cables replaced in a manual transmission vehicle.

How long does it take to change a transmission shift cable?

How Long Does It Take to Replace a Shift Cable? The time it takes to replace a shift cable will vary across car make and model. On average, the shifter cable takes 1.5-2 hours to install. If the whole cable does not need to be replaced, other repairs on the same part may take less time to complete.

What causes shifter cable to break?

The most common reason for failure of a shift cable is stretching. It is more common in vehicles with manual transmissions because you move the shifter more frequently; you don’t just set it and forget it as you do with an automatic transmission.

Is the shifter part of the transmission?

The gear shifter is normally located between the two front seats of the vehicle on a manual transmission. The gear knob is the top of the gear shifter, and includes a shift pattern that guides the gear selection. The shift pattern indicates which way the gear shifter should be moved when selecting a certain gear.

THIS IS IMPORTANT:  Does engine braking hurt the transmission?

What does it mean when your shifter won’t move?

An open circuit in the shift interlock electrical system can cause the shifter to become stuck in Park if the open circuit interrupts communications between the brake light switch or the ignition switch and the interlock solenoid. Check for power at the shift interlock solenoid.

How hard is it to replace a shifter cable?

It’s relatively easy to replace broken shift cables on a vehicle. It simply connects from the shifter to the transmission shifting arm with a cable that is anchored in two spots for stabilization.